S&C Instruction Sheet 695-510
33
Appendix E
Table 9. Accessories
Item
Catalog Number
Shotgun clamp stick–for use with separable connectors
6-foot-5½-inch length
9933-150
8-foot-½-inch length
9933-151
Storage bag for shotgun clamp stick . Heavy canvas
6-foot-6-inch length
9933-152
8-foot-6-inch length
9933-153
Pentahead socket for ½-inch drive
9931-074
Motor operator .
①②
Facilitates power operation of load-interrupter switches or fault interrupters . Can be permanently attached
to load-interrupter switches or fault interrupters, or it can be used as a portable motor operator to effect operation of a load-
interrupter switch or fault interrupter from a remote location . Requires user-furnished 120–240-Vac, 50/60-Hz control power
source
38415-A
Portable remote control pendant with a 25-foot (762-cm) cable .
③
Includes OPEN/RESET, CLOSE, and ENABLE pushbuttons,
operator- and isolating-disconnect position-indicating lamps, and a lamp test button . The pendant is fully submersible
TA-3273-25
Portable remote control pendant with a 50-foot (1524 cm) cable .
③
Includes OPEN/RESET, CLOSE, and ENABLE pushbuttons,
operator- and isolating-disconnect position-indicating lamps, and a lamp test button . The pendant is fully submersible
TA-3273-50
Overcurrent control adapter cable .
Required for programming overcurrent
control
For connecting a control to a user-
furnished personal computer in the field
For personal computers having a 25-pin
serial communication port
TA-2366
For personal computers having a 9-pin
serial communication port
TA-2367
For connecting a control to user-
furnished personal computer in the shop
For personal computers having a 25-pin
serial communication port
TA-2368
For personal computers having a 9-pin
serial communication port
TA-2369
①
Order portable remote control pendant, one per switchgear assembly
or one for each portable motor operator .
②
If switchgear is furnished with optional auxiliary contacts (catalog num-
ber suffix “-S1” through “-S6”), the portable remote control pendant will
show the position of the load-interrupter switch or fault interrupter
and
the
position of the isolating disconnect .
③
The default color scheme for operator and isolating disconnect
position-indicating lamps is green for OPEN/RESET and red for CLOSED
indcators (these can be reversed) .
Appendix F
Table 10. Replacement Parts
Item
Catalog Number
600-ampere bushing adapter kit
CHA-1976
200-ampere bushing-well adapter kit
CHA-1975
Bushing and bushing-well adapter assembly tool
①
CH-2728
①
The tool
can
be used to remove/install 600-ampere bushing adapters; it
must
be used to remove/install 200-ampere bushing-well adapters .
Table 11. USB Cable Kit
Item
Catalog Number
USB cable kit for connecting a personal computer to overcurrent control . Includes driver CD-ROM and installation instructions
TA-3153
