82002-PG-F
ST3400 TAWS/RMI PILOT’S GUIDE
PAGE 60
(This page intentionally left blank)
82002-PG-F
ST3400 TAWS/RMI PILOT’S GUIDE
PAGE 61
CHAPTER 12. TAWS SYSTEM ERROR DISPLAY
If the self-test feature detects a system error on power-up, the System Error
display is shown with an indication of the cause of the error.
If the cause of the error is an erroneous CRC (Cyclic Redundancy Check)
then the expected and calculated CRC is displayed.
If the cause of the error is a failed memory test, the type of memory and the
address is displayed.
When the display shows a “RESET” identifier, use the
[RMI]
button to reset
the system.
SYSTEM ERROR DISPLAY
Button Description
Reset
Resets the TAWS system when the System Error
display is shown with a “RESET” identifier above
the RMI button.
SYSTEM ERROR MESSAGES
Text Message
Description
MEM_DRAM_A
DRAM memory failure