10
“ VEND “
Activation of the ENTER button (at the “ VEND “ routine) will show the column number
“CXY” (X is number of row, Y is number of column). Activation of the enter button will
perform the vending TEST for selected column, using the up or down button will change
the column number.
Vends made on this routine will not increase the vend counters.
Activation of the HOME button while a column is displayed will return the VMC to the "
VEND "prompt.
Activation of the HOME button at the " VEND " prompt will return to “TEST” prompt.
“VENDS” (shown only if slave is enabled)
TEST vends from slave machine. Same functions as in “Vend” for master machine.
” SL”
Activation of the ENTER button (at the ” SL” routine) will show the last selection button
pressed “SEY” where Y is the number of the selection. Use this routine to TEST all the
selection switch. To come back to the “TEST” menu, keep pressed the first selection for
two seconds.
“RELAY”
Entering the “RELAY” routine the display will show:
“LIT M” relay that drive the lights of the master machines
“LIT S” relay that drives the lights of the slave machines (only if slave is enable)
Pushing the ENTER button will switch the corresponding relay, to exit the function push
the HOME button, to select the relay to be TESTed push the UP or DOWN buttons.
“TEMP”
Activation of the ENTER button in the “TEMP” routine will show the temperature of the
master machine, pushing the UP button will show the temperature of the slave machine. If
the probe is disconnected “ERR” will appear instead of the temperature. Push the HOME
button to return to the main menu.
“POWER”
Pushing the ENTER button in the “POWER” routine will show the date, hour and the
temperature (master and slave) of the last switching on of the machine.
Pushing the UP and DOWN buttons will show the last 6 events (switching on and
switching off). Push the HOME button to exit the “POWER” routine.
Summary of Contents for Vendo G-SNACK
Page 1: ...G SNACK G SNACK PLUS MASTER SLAVE PROGRAMMING MANUAL...
Page 3: ...2...
