14
THE FOLLOWING INFORMATION DESCRIBES VARIOUS MACHINE
CONFIGURATION SETTINGS
C01 CASHLESS SYSTEM PRICE (ONLY MDB)
This setting is used to allow different vend price with cashless MDB:
C01 = 0 same price for Coinage and cashless
C01 = 1 different price for Coinage and cashless
C02 SLAVE ENABLE (EXTENDED MENU)
This parameter enables or disables the slave machine and relative programming menu:
C02 = 0 Slave machine not installed, normal menu.
C02 = 1 Slave machine installed, extended menu.
C03 EXTRA ROTATION
This parameter is used to activate an extra rotation of the spiral if the product fall is not
detected by the optical barrier (it works only with optical barrier enable) this parameter is
used for master and slave.
C03 = 0 Extra rotation disable.
C03 = 1 Extra rotation enable.
C04 OPEN DOOR DISPLAY MODE
This parameter is used to change the MIS data information that you can read when the
door of VMC is open:
C04 = 0 Display only the Existing Error or NONE
C04 = 1 Display total Sales, total Cash and Existing Error or NONE (default).
C05 RESET COUNTER MODE
This parameter determines how the VMC has to reset the MIS internal counter:
C05 = 0 All the re-settable counter will be reset only using a reset command on MIS
communication mode (command DEX-UCS).
C05 = 1 All the re-settable counter will be reset when you open the door, read at least
one of the re-settable counter and close the door.
Summary of Contents for Vendo G-SNACK
Page 1: ...G SNACK G SNACK PLUS MASTER SLAVE PROGRAMMING MANUAL...
Page 3: ...2...