Instructions for programming
Page 33 of 42
4.3.9.1.2 ~ Syncro spiral
General Menu
⤷
Main machine
⤷
Technician menu
⤷
Snack Options
⤷
Syncro Spiral
In this submenu you can electronically connect 2 spirals together.
The operation of this function is related to the configuration of the motors of the vending machine:
-They must be connected as 1 equal and 1 odd.
-They must be on the same shelf.
If these rules are valid, by pressing button
you will be able to access at the menu of spiral selection to be
coupled.
The system presents the potential spirals to be coupled; By using the button
and
it is possible to
scroll through all the possible spiral pairings that the system has detected. Pressing the button
you are
pairing the two spirals displayed.
Example:
0.-.-.0.0.-.-.0. . .Tray 1
The system has detected 2 possible pairs: The spiral 12 with the spiral 13 and the spiral 16 with the spiral 17.
Pressing the button
on the first pair of spirals to connect them, the system see it as a single spiral and will
assign the value of the selection the first motor (in this example, the number 11).
Once synchro is activated, instead of dashes " - " will be displayed a flashing asterisk "
*
"
Example:
0.*.*.0.0.*.*.0. . .Tray 1
4.3.9.1.3 ~ SVE02 update
General Menu
⤷
Main machine
⤷
Technician menu
⤷
Snack Options
⤷
SVE02 update
» Menu not used on model SSP.
4
4
3
2
4
