Instructions for the installer, maintenance
technician and final user
Page 14 of 54
© SandenVendo Europe SpA
2 VENDING MACHINE IDENTIFICATION
2.1 Identification Plate
Each SandenVendo vending machine is identified by a model name and a specific serial
number, which can be found on the plate, located on the outside on the back of the vending
machine and inside above the drawer.
The plate is the only one recognized by the manufacturer as the vending machine
identification and contains all the data that allow the manufacturer to provide any type of
technical information and to facilitate the management of spare parts.
The following data are shown on the plate:
i
An identical plate is placed above the cooling system only with the data concerning the
system itself.
Attention!
It is absolutely forbidden to tamper or modify the data plate.
Important!
For any request to the service centers, always refer to this plate, indicating the specific data
printed on it.
Name of the manufacturer
Address and Logo
Conformity marking
Model
Serial Number
Supply voltage
Power frequency
Electrical power
absorbed
Max power of the
lamp used
Climate class
GWP value
expressed in
equivalent tons of
CO
2
Global warming
potential
Relative humidity
Maximum current
draw
Fuses
Type and
quantity of
refrigerant gas
