Instructions for the installer, maintenance
technician and final user
Page 22 of 54
© SandenVendo Europe SpA
3.3.2 Placement
Attention!
Make sure that the capacity load of the surface on which the vending machine is positioned is
adequate to support the weight declared by the manufacturer;
Attention!
Before connecting vending machine, make sure that the mains power supply has the correct
voltage, frequency and power as those indicated on the technical data plate of the vending
machine.
Attention!
The appliance must be connected to a power supply network with grounding in compliance
with current legislation. The manufacturer can not be held responsible for any damage
caused by the lack of grounding system.
Pull out the service cord form the back of the vending machine
through the slot in the rear grill.
Position the vending machine in the place of installation, operate with
caution, avoid maneuvers that can cause sudden jolts and impacts to
the machine.
The appliance must be installed in such a way that the plug is
accessible after installation.
Air circulation is vital for the refrigeration system, check that the
distance between the rear of the distributor and any obstacle (e.g.
wall) is at least equal to 10 cm (100 mm).
For optimal operation, we recommend positioning the vending
machine on perfectly flat surfaces. Any unevenness in the floor can be compensated by
adjusting the screw legs of the distributor in order to obtain perfect leveling and guarantee
stability.
Make sure that the ventilation grilles are always free and not obstructed by dust or similar
to guarantee perfect ventilation of the cooling unit..
If the installation takes place in safety evacuation corridors, make sure that there is still
enough space for passage even with door open of the vending machine.
To ensure smooth operation, always keep the vending machine in perfect clean condition.
i
In the event of extraordinary maintenance or repair / replacement of some
components, the possibility of rotating the appliance must be provided, in order to be
able to access the rear part.
Attention!
SandenVendo Europe declines all responsibility for damages caused to people or things due
to:
•
Incorrect installation.
•
Improper power supply.
