V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230298
SET-UP AND CODE DESCRIPTION (CONTINUED)
SALE
MIS Data – Sales Mode
If selection button two is pressed at the “
SALE
” prompt, the display will show the non-
resettable historical amount of units sold by the machine. If selection button one is pressed, the
display will show “
SL 1
” (selection one) and the units sold for selection button one. Continue
pressing selection button one to scroll through all of the selections. To exit the setting, press
selection button three.
COSt
Cost Setting Mode
The purpose of this mode is to enable the controller to set the vend price for each of the
selections. If selection button two is pressed at the “
COSt
” prompt, the display will indicate “
SL
1
”. Pressing selection button one will scroll through all of the selections or “
ALL
” to have all the
vend prices set at the same price. Pressing selection button two will enter into the displayed
selection button. Pressing selection button one will change the displayed vend price. Pressing
selection button two again will save the price and selection button three will exit the mode.
dCtr
Discount Counter
(Only shows when discounts are used)
The discount counter allows you to access the sales and cash data for vends that have been
discounted. Press selection button #2 when the display reads
dCtr
. The display will change to
read
CASh
. Press selection button #2 when the display reads
CASh
. The display will change to
read
CASh
and XXXX.XX, where XXXX.XX is the value of all discounts towards paid sales. This
total is non-resettable and begins when the discount feature is enabled. Pressing selection
button #1 will scroll through all of the selection buttons and display the value of the discounts
toward product sales. The amounts for the individual selections can be reset using the rules in
the
oPts
mode. To exit this mode, press selection button #3. The display will return to
CASh
.
To advance to the sales information, press selection button #1. The display
CASh
will change to
SALE
. Press selection button #2 to access this information. The total number of discounted
sales will be displayed. This total is non-resettable and begins when the discount feature is
enabled. Pressing selection button #1 will scroll through all of the selection buttons and display
each selection’s number of discounted sales. The amounts for the individual selections can be
reset using the rules in the
oPts
mode.
FCtr
Free Counter
(Only show if free vends during closed-door sales mode have been made)
The free counter allows you to access the sales and cash data (loss) for vends that have been
free. Press selection button #2 when the display reads
FCtr
. The display will change to read
XXXX.XX, where XXXX.XX is the value of all lost money based on the price value setting. This
total is non-resettable and begins when the free vend override feature is enabled. Pressing
selection button #1 will change to the second screen. The display will change to read
SALE
XXX.XX. It will display the total number of free vends that have occurred. This total is non-
V21
12.1 Programming Trade | P3-6