V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230298
If selection button two is pressed at the “
FrEn
” prompt, the controller will enter the Free Vend
Enable Option. Upon entry into this program the display will show the current setting “
FrEn
”.
Press selection button two. Pressing selection button one will toggle between “y” for enabled
and “n” for disable. Pressing selection button two will save the currently displayed setting.
Pressing selection button three will return the operator to the “
FrEn
” prompt.
“Y” = Enable free vend.
“N” = Disable free vend.
bLCn
Over-Ride Selection Blocking
If selection button two is pressed at the “
bLCn
” prompt, the controller will enter the Selection
Blocking Over-Ride Enable Option. Upon entry into this program the display will show the
current setting “
bLCn
”. Press selection button two. Pressing selection button one will toggle
between “Y” for enable and “N” for disable. Pressing selection button two will save the currently
displayed setting. Pressing selection button three will return the operator to the “
bLCn
” prompt.
“Y” = Enable selection blocking.
“N” = Disable selection blocking
SET-UP AND CODE DESCRIPTION (CONTINUED)
Litn
Over-Ride Lighting
If selection button two is pressed at the “
Litn
” prompt, the controller will enter the Lighting
Over-Ride Option. Upon entry into this program the display will show the current setting
“
Lit4
” for enable and “
Litn
” for disable. Pressing selection button one will toggle between
“y” for enabled and “n” for disable. Pressing selection button two will save the currently
displayed setting. Pressing selection button three will return the operator to the “
Litn
” prompt.
“Y” = Enable Over-Ride Lighting blocking.
“N” = Disable Over-Ride Lighting blocking
rFGn
Over-Ride Refrigeration
If selection button two is pressed at the “
rFGn
” prompt, the controller will enter the
Refrigeration Over-Ride Option. Upon entry into this program the display will show the current
setting “
rFG4
” for enable and “
rFGn
” for disable. Pressing selection button one will toggle
between “y” for enabled and “n” for disable. Pressing selection button two will save the currently
displayed setting. Pressing selection button three will return the operator to the “
rFGn
” prompt.
“Y” = Enable refrigeration over-ride.
“N” = Disable refrigeration over-ride.
dSCn
Over-Ride Discount
V21
12.1 Programming Trade | P3-16