4X
3X
2X
Turn the handle of the safe clockwise and pull the safe door open.
5
Turn the dial slowly
clockwise until it
stops, at about 87.
There may be some
resistance at around
95 (which is normal).
Turn the dial
counter-clockwise
passing the third
number of the
combination. Stop
at exactly the third
number of the
second revolution.
Turn the dial
clockwise, passing
the second number
of the combination
twice. Stop at
exactly on the
second number of
third revolution.
Rotate the dial
counter-clockwise
at least four full
revolutions. Stop
exactly on the first
number of the
combination.
4
3
2
1
Day-Lock Instructions
For maximum security, it is recommended using the Day-Lock in addition to the
combination to the manual lock. This feature is also helpful to prevent the dial from
rotating and accidentally locking when moving items into or out of the safe.
Suggested Day-Lock Operation
1.
Shut the safe door and turn the handle or hand wheel counter-clockwise to
extend the locking bolts into the locked position.
2.
Rotate the dial counter-clockwise at least four times to clear the
combination completely.
3.
Stop at about “87” on the Index Mark.
4.
Insert the Day-Lock key into the keyway and turn counter-clockwise until it stops.
Remove the key.
To Open After the Day-Lock is Locked
1.
Insert the Day-Lock key into the keyway and turn clockwise until it stops. Remove
the key.
2.
Follow the “Operating the Dial on the Manual Lock” instructions.
Changing Combination on Manual Locks
The lock portion of the Warranty will be void if anyone other than a certified locksmith
changes the combination on a manual lock. Contact Rhino Metals Tech Support to
locate a certified locksmith.
Lost Combination and Keys for Manual Locks
Most safes have their original combination stored by serial number at Rhino Metals.
If the combination is lost, a $25.00 research fee will be assessed for restoring the
combination to the original owner. If keys are lost, a $25.00 fee will be assessed for
each set of duplicated keys requested. Both requests require completing and
The Day-Lock does not lock the safe. It is intended to prevent the dial from
rotating.
