②
A
:
Press [F1](RECORD) to return
to measure function, and set the
input coding as the code of the
present measuring point, add a new
coding value to Measurements
document
※
2)
B
:
Press [F2](ADD) besides
returning to measure function and
setting the input code as the code of
present measuring point,a new code
will also be added to the coding
storeroom .
※
3)
C
:
Press [F4] (OK) only to set the
input code as the code of present
measuring pointID and return to
measure function. Only by starting
surveying can the input coding be
saved into Measurements documents
along with measuring operations.
※
4)
A
:
The code value being added in survey point
document
B
:
New code added in the code storeroom:
C
:
【
VIEW
】
88
Mode
:
CODING SYS.MESS
Pt ID
:
--- --- ---
Code
:
SANDING
Desc
:
--- --- ---
Date
:
05.08.2006
Time
:
11:29:41
SEARCH
【
Code search / delete
】
1/2
▼
Search
:
*
Code
:
SANDING
Desc
:
VIP
Info1
:
--- ---
Info2
:
--- ---
Info3
:
--- ---
NEW DELETE
【
Measure
】
3/4
Pt ID
:
A1
CODE
:
SANDING
RHT
:
1.500 m
HZ
:
63°40
′
50
″
HZ
:
94°33
′
51
″
Ⅰ
:
---.--- m
AII CODE ED
M
↓
※
1)Press[TURN PAGE]key to edit /view the other pages of the coding attributes
※
2)The added coding data can be seen in the Measurements document in File management
※
3)The added coding can be found in the coding storeroom.
※
4)Press[OK]key to conclude the coding function , the coding blocks are kept in the system
temporarily, and they can only be recorded together with the practical measurement point.
The settings of coding record in
“
Settings
”
or ‘Main settings’ are:
“
save before and save
after
”
,here explain separately as follows
:
save before
:
to save coding data before practical survey data
save after
:
to save the coding data closely after practical survey data
Please inquire in “measurements’ document.
3.3.5 )Quick Code(Only For STS-750)
To use quick code function, you can call up directly a pre-defined coding by numeric keys of
the instrument. By inputing a digit of two bit, you may choose a code and trigger survey. Since the
survey is triggered, the survey data and coding will be saved all together.
100 quick codings in all can be defined,you may create coding with code block manager
provided by SANDING company, and transfer to the instrument .In the code block manager, each
code can be arranged 1bit or 2bit digit exclusively
If the code was not dispatched with a digit from
“
coding block manager
”
,the code will be
choosed according to their inputing sequence(e.g.: 01->:the first code in the code list.10->the tenth
code in the code list).For the coding format please refer to appendix A.
39
Summary of Contents for STS-750
Page 6: ...6...