△
：
Height
correction
△
：
Correction of the horizontal distance
△
Hz
：
Correction of HZ angle.
SIGNIFICANT INFORMATION
If the orientation is only measured in telescope Face II the HZ orientation is based on
telescope Face II. If measured only in telescope Face I or mixed the HZ orientation is based on
Face I.
The reflector height may not be changed during measurements in the first and second
telescope face.
If a target point is measured several times in the same telescope face, the last valid
measurement is used for the computation.
If no orientation was set and an application was started resp. if in “Measure” [All] or [REC]
was triggered, then the current HZ direction and V-angle are set as orientation.
5.4 Applications
Introduction
Applications are predefined programs, that cover a wide spectrum of surveying duties
and facilities daily work in field.
Applications listed as follow are available.
·
Surveying
·
Stake Out
·
Free Station
·
COGO
·
Tie Distance
·
Area (Plan)
·
Remote Height
·
Reference Line/Arc
·
Roads
·
Construction
PROCEDURE:
1.
Press fixed key [MENU].
2.
Press [F1]-[F4] to select “Program” option.
3.
Calling up applications and activating start programs. Press [PAGE] to turn to next
page.
5.5 Surveying
The measurement of an unlimited number of points is supported in Surveying program. It is
【
Orientation Residuals
】
BsPt
：
BS1
△
Hz
：
0°00
′
02
″
△
：
-0.005 m
△
：
0.003 m
BACK
70
Summary of Contents for STS-750
Page 6: ...6...
