Chapter 12. Plugins
141
Help
Opens a brief help screen with key mappings and functionality.
Credits
Displays a credits roll.
Analog mode
Small, round, analog clock is displayed in the middle of the LCD. Time readout, if
enabled, is displayed at the upper left. If Time readout is in 12-hour (“12h”) mode, AM
or PM will be displayed at the upper right. The Date readout, if enabled, is displayed
at the lower left. The Counter, if enabled, is displayed at the lower right. The second
hand, if enabled, is displayed along with the hour and minute hands. Digit display, if
enabled, places “12”, “3”, “6”, and “9” around the face of the clock in their respective
positions.
Digital mode
An imitation of an LCD, this mode shows a Clock comprised of digital “segments”. The
Date readout, if enabled, is displayed at the bottom, center. The Second readout, if in
“Text” mode, is displayed at the top, center; if in “Bar” mode, is displayed as a progress
bar at the top of the LCD; if in “Invert” mode, will invert the LCD left-to-right as the
seconds pass (a fully-inverted LCD means the entire minute has passed). The Counter,
if displayed, is shown at the upper left. The Blinking Colon, if enabled, blinks the colon
once every second. 12-hour mode, if enabled, will display the time in a 12-hour format.
LCD mode
Based on the Digital Mode, the LCD mode is another imitation of an LCD. The settings
available in this mode are exactly the same as Digital Mode, but they are independent
of Digital Mode. For example, you can have the Date Readout enabled in Digital Mode
and disabled in LCD Mode.
Fullscreen
A Fullscreen clock is displayed. Show Border, if enabled, will draw a small box at every
hour position (1 to 12 inclusive). Invert Seconds, if enabled, will invert the LCD as the
seconds pass. Second Hand, if enabled, will draw a second hand among the hour and
minute hands.
Binary mode
This mode shows a Binary clock. The hour is displayed on the top line, the minute
is displayed on the middle line, and the seconds are on the last line. Circle mode, if
enabled, draws empty and full circles, instead of zeros and ones. For help on reading
binary, please visit:
http://en.wikipedia.org/wiki/Binary_numeral_system
The Rockbox manual
(version 3.14)
Sansa Clip v2