E-Cigarette Battery Power
Jump Pack Power
Charging Port
Label
By wall adapter through USB
By computer through USB
By car converter through USB
When not smoking Bailey’s
®
, you should
always keep it stored in the Jump Pack.
UNIT OVERVIEW
When charging the E-cigarette battery through
the Jump Pack, insert the E-cigarette battery
into the Jump Pack. The power of the E-cigarette
battery will be checked automatically.
The LED
① ②
will light and last for eight
seconds. If the power of the E-cigarette battery
is not full, the Jump Pack will charge it
automatically. Indicator
①
will flash when the
unit is charging. When the Jump Pack is fully
charged, the light will turn off.
When charging the Jump Pack with the USB cable,
indicator
②
will flash when charging. When all three
bars are lit, the Jump Pack is fully charged.
Indicator
②
flashes when the Jump Pack charges
the E-cigarette battery.
If the voltage is below 3.2V, please recharge.
CONTENTS OF
JUMP PACK KIT
1 Bailey’s
®
Jump Pack
1 Wall Adapter
1 USB Cable
2 Batteries
5 Cartomizers
Once you have charged your batteries and placed
your first cartridge on the Bailey’s
®
Electronic
Cigarette, you are ready to start using it. Simply place
the cartridge end in your mouth and inhale slowly like
a normal cigarette. This will initiate the atomizer
contained within the cartridge that will vaporize the
liquid and allow you to inhale and exhale vapor. Each
time you “drag” on your Bailey’s
®
, the LED tip will
light to indicate that it is working properly. This is the
only way your Bailey’s
®
Electronic Cigarette is to be
used and it should not be used in any other manner.
When not smoking the E-cigarette, please store in the
Jump Pack.
CHARGING
INSTRUCTIONS
1
2
Store cartomizers and battery
in housing slot when not in use.
Remove the silicon cap
on the cartomizer.
Screw the cartomizer
clockwise until it is firmly
attached to the battery.
Battery
Cartomizer
3
Smoke as you would any cigarette. Inhale & enjoy!
HOW TO PROPERLY
USE YOUR
Bailey’s
®
(Ships empty. Shown in picture fully assembled.)
Unit when
fully assembled.
IMPORTANT:
