INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY NOTES
-
The radiator Must Not be sited directly under an electrical connection socket
or similar device.
-
When installing the radiator in a bathroom or similar environment with water
present; the radiator Must Not be mounted where the switches or thermostat
controls could come into contact with water, i.e. near bathtubs, wash basins
or swimming pools. The radiator must be installed outside the recommended
water spray area.
-
Do Not cover the appliance with objects which would restrict dispersal of
radiated heat. Any object covering the appliance could cause the appliance
to overheat.
-
Do Not use the radiator for the drying of clothes to prevent problematic operation
and the possibility of the appliance overheating.
-
Do Not operate the radiator control switches with wet hands.
-
Before any cleaning or maintenance the appliance must be disconnected and
isolated from the mains electrical supply.
IMPORTANT:
THE MCN SERIES OF OIL FILLED RADIATORS MUST BE
CONNECTED TO AN ELECTRICAL SUPPLY WITH AN EARTH
/ GROUND CONNECTION.
-
The radiator must be connected to the electrical supply in conjunction with
a suitably rated electrically isolating double pole switch. All switches used
must have a minimum contact clearance of at least 3mm.
-
When the installing the appliance ensure that the electrical supply cable is
routed away from areas of heat or other heating products.
-
If the electrical supply cable is found to be damaged then the appliance Must
Not Be Used. The appliance must be returned to an authorised supplier or
repaired by a suitably qualified person.
-
All MCN radiators incorporate a special high thermally conductive oil filled to
exactly the correct quantity and specification. If the radiator is found to be
damaged and subsequently leaking the oil, then the appliance must be returned
to an official S&P dealer or supplier for repair.
INSTALLATION
The MCN range of oil filled electric radiators have been specifically designed to
be mounted in a fixed position on a wall or similar structure. For trouble free
operation the radiator should be installed in accordance with the following steps:
Location of the Radiator
The mounting position and configuration of the radiator will ultimately effect the
efficiency of operation and heat dispersal. To ensure the optimum operational
efficiency of the radiator; we would recommend that the appliance is installed
in accordance with either of Fig's 1-5, dependant upon the intended mounting
configuration.
12
