DESCRIPTION OF THE MODES OF FUNCTION
STOP Mode
:
In this mode, the radiator maintains the ambient
temperature pre-selected by the user
REDUCTION Mode
: When the user selects this mode of function, the
radiator automatically maintains the room temperature
3.5 degrees below the temperature selected in comfort
mode. For example; if you have previously
programmed the comfort temperature to 23ºC, and
you select the reduction mode, the apparatus will
maintain a temperature of 19.5ºC without having to
alter the comfort mode temperature.
ANTI-FREEZE Mode
: This mode is used to avoid the temperature in the
room falling below 5ºC, thereby avoiding possible
damage from frozen pipes, water pumps, etc.
TIMER Mode
: This serves to program the different connection and
disconnection times. In order to programme this
function, the S&P programming console C-440 is
necessary
ADJUSTING PARAMETERS
Once the radiator is positioned and connected to the mains, put the On/Off switch
into position I, and all the symbols on the screen will light up for a short time, to
ensure that the screen is working correctly.
Adj. STOP mode
:
Press the MODE key, and one of the symbols
will begín to flash. Using the + or - keys, select the
SUN symbol. Once this is flashing, push the MODE
key once again and using the + or - keys, select the
desired temperature. To finalise the operation, push
the MODE key once again.
Adj. REDUCTION mode
: Press the MODE key, and using the + or -
keys, select the MOON symbol, then press the MODE
key twice.
14
