background image

20

Holidays mode: (Flashing red LED) 
Press the left key for 3 seconds to activate Holidays mode (50% of minimum airflow). It is
possible to return to normal mode by pressing the same key once more. 

Filters alarm: (red LED): 
DOMEO alerts when the filter timer has arrived to the limit lightning a red LED on the 
right hand key. The factory setting is 9 months after commissioning or changing the 
filters.  You must change the filters. 
If the 9 month interval is not ideal for the configuration or use of your installation (filters 
too dirty or clean) it is possible to adjust this setting from 6 to 15 months (in 3 monthly 
steps 

 see paragraph 5-1-b)

Once changes have been made push the button 3 seconds to deactivate the  

alarm and reset the timer.

Minimum airflow (Trickle): (Flashing green LED) 
When the DOMEO is in Boost mode, it is possible, by pressing the left button, 
to return to the minimum airflow before ½ hour has elapsed 

Boost: (Flashing green LED) 
A button that enables the boost airflow for 30 minutes to be selected in ½-hour steps. 

By-pass: (Flashing green LED) 
On having avoided the heat exchanger, the 100% by-pass system of the 
DOMEO allows the introduction of fresh air in the night without being warmed 
by the warm air accumulated in the house during the day.  
This system works automatically with this conditions: 

- Tº inner >1+ Tº outer and Tº inner > 24ºC and Tº outer> 12ºC,

The specific airflow can be adjusted to optimize the cooling nigh time or free cooling (see 
paragraph 5.1.a 3)

 

If you want , you can manually switch to by-pass mode by pressing the by-pass button. 
During this operation it is possible to cancel this function by pressing the by-pass key 
once more. 

The remote control put on the “energy saving” mode after 10 seconds, switching off  all LEDS. 

Pushing on one of the keys the function LED activated  lights. 

5.2 - During use

 The remote control allows the user to: 

Activate the boost for ½ hour.

Return manually to the minimum airflow

Put DOMEO in holidays mode

Manually switch on the by-pass mode

Reset filters alarm

Kitchen Boost 

By-pass 

Low Airflow 

Holidays mode 

Summary of Contents for DOMEO 210 RD

























Reviews: