4.1. Disassembly of heat exchanger
Cut the heat exchanger’s grip using scissors and remove the metal supports by hand.
4.2. Disassembly of fan-motor
Use a phillips screwdriver to unscrew the two screws that join the scroll of the fan. Then, unscrew the three
screws that unite the scroll to the motor.
4.3. Disassembly of main body
Unscrew the last two screws remainint in the down face in order to remove the lasts metal pieces from the
main body. The main body is made entirely in plastic.
5. Disposal / recycling
Disposal must be carried out professionally and in an environmentally friendly way in accordance with the
respective national legal stipulations. Separate materials by type and, if necessary, commission a specialist
company with the waste disposal.
www.solerpalau.com
