ENGLISH
19 / 40
NT_51895501_AKOR ST HR-AN_140325.docx
Filters
7.1.2
using a flat screwdriver (4mm),
remove the clips,
slightly tilt the extraction face
with the filter,
then raise it with the filter
upwards,
Remove the filter holder,
unclip the filter holder to
release the filter,
Do the same for the fresh air
intake.
Dust off the filters with a brush or vacuum cleaner.
Filters can also be cleaned in warm soapy water. Allow them to dry completely before putting them back into
the unit.
Exchanger
7.1.3
Release the 6 attachment points as shown in the diagram above.
Note : To avoid breaking the cover, fully release the 6 fixing points before lifting the cover.