background image

s30nmdl3sm-rev1218

sandpiperpump

.

com

9

 • Model S30 Non-Metallic 

Material Codes - 

The Last 3 Digits of Part Number

000.....Assembly, sub-assembly;  

and some purchased items

010.....Cast Iron

015.....Ductile Iron

020.....Ferritic Malleable Iron

080.....Carbon Steel, AISI B-1112

110 .....Alloy Type 316 Stainless Steel

111 .....Alloy Type 316 Stainless Steel  

(Electro Polished)

112 .....Alloy C

113 .....Alloy Type 316 Stainless Steel  

(Hand Polished)

114 .....303 Stainless Steel

115 .....302/304 Stainless Steel

117 .....440-C Stainless Steel (Martensitic)

120.....416 Stainless Steel  

(Wrought Martensitic)

148.....Hardcoat Anodized Aluminum

150.....6061-T6 Aluminum

152.....2024-T4 Aluminum (2023-T351)

155.....356-T6 Aluminum

156.....356-T6 Aluminum

157.....Die Cast Aluminum Alloy #380

158.....Aluminum Alloy SR-319

162.....Brass, Yellow, Screw Machine Stock

165.....Cast Bronze, 85-5-5-5

166.....Bronze, SAE 660

170.....Bronze, Bearing Type,  

Oil Impregnated

180.....Copper Alloy

305.....Carbon Steel, Black Epoxy Coated

306.....Carbon Steel, Black PTFE Coated

307.....Aluminum, Black Epoxy Coated

308.....Stainless Steel, Black PTFE Coated

309.....Aluminum, Black PTFE Coated

313.....Aluminum, White Epoxy Coated

330.....Zinc Plated Steel

332.....Aluminum, Electroless Nickel Plated

333.....Carbon Steel, Electroless  

Nickel Plated

335.....Galvanized Steel

337.....Silver Plated Steel

351.....Food Grade Santoprene

®

353.....Geolast; Color: Black

354.....Injection Molded #203-40  

Santoprene

®

 Duro 40D +/-5;  

Color: RED

356.....Hytrel

®

357.....Injection Molded Polyurethane

358.....Urethane Rubber  

(Some Applications)  

(Compression Mold)

359.....Urethane Rubber

360.....Nitrile Rubber Color coded: RED

363.....FKM (Fluorocarbon) 

Color coded: YELLOW

364.....EPDM Rubber  

Color coded: BLUE

365.....Neoprene Rubber 

Color coded: GREEN

366.....Food Grade Nitrile

368.....Food Grade EPDM

371.....Philthane (Tuftane)

374.....Carboxylated Nitrile

375.....Fluorinated Nitrile

378.....High Density Polypropylene

379.....Conductive Nitrile

408.....Cork and Neoprene

425.....Compressed Fibre

426.....Blue Gard

440.....Vegetable Fibre

500.....Delrin

®

 500

502.....Conductive Acetal, ESD-800

503.....Conductive Acetal, Glass-Filled

506.....Delrin

®

 150

520.....Injection Molded PVDF  

Natural color

540.....Nylon

542.....Nylon

544.....Nylon Injection Molded

550.....Polyethylene

551.....Glass Filled Polypropylene

552.....

Unfilled Polypropylene

555.....Polyvinyl Chloride

556.....Black Vinyl

557.....Unfilled Conductive Polypropylene

558.....Conductive HDPE

559.....Glass Filled - Conductive Polypropylene

570.....Rulon II

®

580.....Ryton

®

600.....PTFE (virgin material)  

Tetrafluorocarbon (TFE)

603.....Blue Gylon

®

604.....PTFE 

606.....PTFE 

607.....Envelon

608.....Conductive PTFE

610.....PTFE Encapsulated Silicon

611 .....PTFE Encapsulated FKM

632.....Neoprene/Hytrel

®

633.....FKM/PTFE 

634.....EPDM/PTFE 

635.....Neoprene/PTFE 

637.....PTFE, FKM/PTFE 

638.....PTFE, Hytrel

®

/PTFE 

639.....Nitrile/TFE

643.....Santoprene

®

/EPDM

644.....Santoprene

®

/PTFE 

656 .....Santoprene

®

 Diaphragm and  

Check Balls/EPDM Seats

661.....EPDM/Santoprene

®

666.....FDA Nitrile Diaphragm,  

PTFE Overlay, Balls, and Seals

668.....PTFE, FDA Santoprene

®

/PTFE

• Delrin and Hytrel are registered  

tradenames of E.I. DuPont.

• Nylatron is a registered tradename  

of Polymer Corp. 

• Gylon is a registered tradename  

of Garlock, Inc.

• Santoprene is a registered tradename  

of Exxon Mobil Corp.

• Rulon II is a registered tradename  

of Dixion Industries Corp.

• Ryton is a registered tradename  

of Phillips Chemical Co.

• Valox is a registered tradename 

of General Electric Co.

RECYCLING

Warren Rupp is an ISO14001 registered company 

and is committed to minimizing the impact our products 

have on the environment. Many components of 

SANDPIPER® AODD pumps are made of recyclable 

materials. We encourage pump users to recycle worn 

out parts and pumps whenever possible, after any 

hazardous pumped fluids are thoroughly flushed. 

Pump users that recycle will gain the satisfaction to 

know that their discarded part(s) or pump will not 

end up in a landfill. The recyclability of SANDPIPER 

products is a vital part of Warren Rupp’s commitment 

to environmental stewardship.

3: EXP

 VIEW

Summary of Contents for S30

























Reviews: