27
3. Press and OK to select and adjust the following options.
Ringer
Select ringer and volume for base station.
Flash Time
You may need R (Flash) to send a Recall signal (also
called Timed Break Recall) if you are connected to
a PBX. You should normally leave the Recall Time
at its default setting of Short (100ms), as this is the
standard recall required in the telephone network,
but it can be changed to Long (600ms) if your
telephone is connected to a PBX that requires a
different recall time.
Change Sys.PIN
The System PIN is used for registration/de-
registration of handsets and for accessing the
answering machine remotely. The default System
PIN number is 0000. The maximum length of the
System PIN is 8 digits.
Reset Base
Reset base setting to default.
4. Press to exit the main menu.