31
Hints and Tips
ALWAYS check first that:
• You have followed all the steps listed in the user manual to install and
set up your telephone.
• All connectors are firmly inserted in their sockets.
• Mains power to the base station is switched on at the mains socket.
• The handset’s batteries are correctly and securely installed and are not
run down.
Everyday use
I cannot make or answer calls
• If the handset’s display is blank, it may have been switched off. Put the
handset back on the base station to turn it back on.
• Check that the base station’s mains power adapter is plugged in and the
power is switched on.
• The base station needs mains power for normal operation of the phone,
not just for charging the batteries.
• Make sure you are using the telephone line cable supplied with your
phone. Other telephone line cables might not work. Move the handset
closer to the base station.
• Check the battery level symbol on the display. If it is low, replace the
handset on the base station to recharge the batteries.
• Switch off the power at the mains socket, wait for a short time and then
switch back on. This may solve the problem.