GB
16
General Operation
The blue LED power indicator will fl ash red for any action, to inform you that
the action has been received.
Switching On / Off and Selecting the Function
• Press the ON/OFF switch at the rear of the unit to turn on the unit. The LED indicator will
light up red.
• Press the SOURCE/STANDBY dial on the unit or press STANDBY button on the remote
control to switch the unit to on mode. The LED indicator will light up blue.
• Press and hold the SOURCE/STANDBY dial on the unit or press STANDBY button on
the remote control to switch the unit to standby mode. The LED indicator will light up
red.
• To completely turn the unit off , press the ON/OFF switch at the rear of the unit to the
OFF position and then disconnect the unit from the mains socket.
Selecting Modes
Press the SOURCE/STANDBY dial on the unit to switch between iPod, Bluetooth, LINE
IN and AUX IN modes. The LED indicator on the front light of the unit will fl ash blue. The
indicator of each mode on the dial’s rim will light up green.
Alternatively press the iPod , Bluetooth , AUX IN or LINE IN button on the remote
control to select desired mode.
If the unit is idle for more than 10 mins, it will automatically switch to standby mode.
Adjusting the Volume
• Turn the SOURCE/STANDBY dial on the unit or press the /– buttons on the
remote control to adjust the volume.
• If you wish to turn the sound off , press the MUTE button on the remote control. Press
the MUTE button again or press the /– buttons on the remote control or
turn the SOURCE/STANDBY dial to resume normal listening
Using the /– buttons at any time during the MUTE mode will restore sound.
.
