11
Secondary Services
You may see a “>” symbol after the name of the primary station whilst exploring the found
stations by turning the SCROLL dial. This indicates that there are secondary services
available to that station. These secondary services contain extra services that are related
to the primary station. e.g. a sports station may want to add extra commentaries. The
secondary services are inserted directly after the primary station in the station list.
To select the secondary station, turn the SCROLL dial continuously until you find the
secondary service and press the OK dial to confirm. When the secondary service ends, the
unit will automatically switch back to the primary station.
Manual Tuning
As well as using the auto tune function, you can manually tune the receiver. This can help
you when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press the MENU button and then press the OK dial
to select Manual tune, the display will now show
Manual tune.
2. Turn the SCROLL dial to cycle through the DAB
channels, which are numbered from 5A to 13F.
3. After your desired channel number is selected,
press the OK dial to confirm, the top line will now
display the channel number, the frequency and
the multiplex name. The bottom line will display
the signal strength.
4. Press the OK dial to listen to this channel or turn
the SCROLL dial to continue manual tuning.
Presetting Stations
You can store up to 10 of your favourite 10 DAB stations to the memory. This will enable you
to access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to
the station that you would like to save, press and
hold the MEMORY button. The display will show
“Empty Preset 1“, and the preset number will
flash.
2. Turn the SCROLL dial to select your desired
station preset number.
3. Press the OK dial to confirm your station, the
display will show “Preset # saved“.
Recalling a Preset Station
1. Once you have saved a station, you can recall it by
pressing the MEMORY button, and then turn the
SCROLL dial to select your desired preset number,
then press the OK dial to confirm.
2. If you choose a preset that hasn’t been allocated a
station, “Preset # empty“ will be displayed.
