13
FM Operation
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press the MODE button once. The top line of the
display will show FM and the frequency or the station name if a RDS station is tuned in.
Auto Scan
To search for an FM station, press and hold the
OK dial to start the auto scan. The display will
show “Searching ... >.” or “Searching ... <.”. Once
a station has been found, the scanning will stop
automatically.
Manual Scan
To search for FM stations manually, turn the SCROLL dial until your desired frequency is
reached.
Audio Mode
Press the OK dial to toggle between the Auto or Mono audio mode.
• The unit will automatically switch between stereo and mono mode, when auto mode is
selected but you can override this and switch this function manually by changing it to
mono mode. This is helpful when receiving poor signal reception.
• During stereo reception, the received L/R stereo sound will be automatically combined
into one single channel to suit the single speaker design of this radio.
Presetting Stations
You can store up to 10 of your favourite 10 FM stations to the memory. This will enable you
to access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to
the station that you would like to save, press and
hold the MEMORY button. The display will show
“Empty Preset 1“, and the preset number will
flash.
2. Turn the SCROLL dial to select your desired
station preset number.
3. Press the OK dial to confirm your station, the
display will show “Preset # saved“.
