GB
9
Hints and Tips
Mouse Not Working:
1. Check that the power switch is in the on position.
2. Make sure the Nano Receiver is plugged into a USB
port and the computer is on or try the Nano Receiver
in a different USB port.
3. Check battery installation. Replace battery if needed.
4. If mouse performance is slow or intermittent around a
wireless network, unplug the Nano Receiver from the
USB port and then reinsert it. To reactivate the mouse,
switch it on, off and on again using the ON/OFF
switch on the bottom of the mouse.
5. Repeat the connection procedure. You can also try
moving the mouse closer to the Nano Receiver.
6. If the mouse is moving erratically change the working
surface which the mouse is operating on.
SMCIRCLE_IB_7L_120220.indb 9
20/02/2012 6:41 PM