14
GB
Manual Setting the Clock
When you first connect the unit to the mains socket. The unit will be in
STANDBY
mode,
and the display will show “— : —”.
1. During standby mode, tap and hold the
ID3/MEM/C-ADj.
icon on the unit or press
the
ID3/MEM/C-ADj.
button on the remote control until the hour digits flash on the
display.
2. Tap the
icons on the unit or press the
buttons on the remote control to
adjust the hour digits, and then tap the
ID3/MEM/C-ADj.
icon on the unit or press the
ID3/MEM/C-ADj.
button on the remote control to confirm. The minute digits will flash
on the display.
3. Tap the
icons on the unit or press the
buttons on the remote control to
adjust the minute digits, and then tap the
ID3/MEM/C-ADj.
icon on the unit or press
the
ID3/MEM/C-ADj.
button on the remote control to confirm. The clock setting is
now complete.
Settings the Daily Timer (Remote Control Only)
1. Press the
TIMER
button on the remote control repeatedly to select the
Timer On
mode. The “Timer On” and the “ ” icon will show on the display to indicate the timer is
on.
2. During Timer On mode, press and hold the
TIMER
button on the remote control until
the display shows “On Timer”, and the hour digits flash.
3. Press the
buttons on the remote control to adjust the hour digits, and then
press the
TIMER
button on the remote control to confirm. The minute digits will flash
on the display.
4. Press the
buttons on the remote control to adjust the minute digits, and then
press the
TIMER
button on the remote control to confirm.
5. When On Timer Clock set, the display will show “Off Timer” and the hour digits will
flash.
6. Press the
buttons on the remote control to adjust the hour digits, and then
press the
TIMER
button on the remote control to confirm. The minute digits will flash
on the display.
7. Press the
buttons on the remote control to adjust the minute digits, and then
press the
TIMER
button on the remote control to confirm.
8. Finally press the
buttons on the remote control to select
FM
,
CD
,
iPod
,
USB
,
CARD
or
DAB
mode, then press the
TIMER
button on the remote control to confirm.
The display will show “VOL20” and flash. Press the
buttons on the remote
control to adjust the volume, and then press the
TIMER
button on the remote control
to confirm.
9. The Timer setting is now complete.
To check the timer setting, tap the
ID3/MEM/C-ADj.
icon on the unit or press the
ID3/MEM/C-ADj.
button on the remote control repeatedly, and the display will
show “on timer” and “off timer” settings.
S1MDABI11E_IB_5L_120724_Zell.indb 14
24/07/2012 11:47 PM