21
GB
Connecting to Network
When you first listen to Internet Radio, you must connect to the Internet
via either a wired or wireless network. Setup the Internet network as
follow:
1.
Press the STANDBY button on the unit or the remote control to
switch on the unit. The main menu will show on the display.
2.
Turn the SCROLL control on the unit or press the
buttons on
the remote control to select Internet radio mode, and press the
SELECT button on the unit or the remote control to select.
3.
Turn the SCROLL control on the unit or press the
buttons on
the remote control to select a region of your choice, and then
press the SELECT button on the unit or the remote control to
confirm. The display will show SSID (the Service Set Identifier) of
all the available Internet networks after scanning.
4.
Turn the SCROLL control on the unit or press the
buttons on
the remote control to select a desire SSID / [Rescan] / [Wired] /
[Manual config].
SSID
Select desired wireless network.
Rescan
Scan for available networks.
Wired
Select wired network (connect with
Ethernet).
Manual config
Select wired/wireless network with
DHCP enable/disable.
5.
After a successful connection to the network, the Internet radio
menu will show on the display.
When the wireless network selected is WEP/WPA secured, a password has
to be input for a successful connection. Use the SCROLL control and the
SELECT button on the unit or the
, SELECT buttons on the remote
control to insert the characters. After inputting the complete password,
highlight “OK” and then press the SELECT button to confirm.
S3DABB_WI11E_IB_5L_111215.indb 21
15/12/2011 10:13 AM
