27
GB
DAB Operation
1.
Press the MODE button on the unit or the remote control
repeatedly to select DAB mode.
2.
The unit will automatically enter into the DAB mode and perform
auto scan function. During the scan the display will show
“Scanning…” that indicates the progress of the scan and the
amount of stations that have been found so far.
3.
Once the scan has finished, the unit will display a list of the found
stations. Explore the found stations by turning the SCROLL control
on the unit or pressing the
buttons on the remote control.
When you find a station that you would like to listen to, press the
SELECT button on the unit or the remote control.
Station List
During DAB mode, press the MENU button on the unit or the remote
control, and then turn the SCROLL control on the unit or press the
buttons on the remote control to select Station list, and then press the
SELECT button on the unit or the remote control. A list of DAB stations
will show on the display.
Auto Scan
1.
During DAB mode, press the MENU button on the unit or the
remote control, and then turn the SCROLL control on the unit or
press the
buttons on the remote control to select Scan, and
then press the SELECT button on the unit or the remote control.
The display will show “Scanning…” and a progressing slide
bar. This may take a few minutes, depending on the number of
stations found.
2.
All the stations that have been found will be automatically stored.
To explore the found stations, turn the SCROLL control on the unit
or press the
buttons on the remote control. Press the SELECT
button on the unit or the remote control to start playing the
desired station.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver.
This can help you when aligning your aerial or when adding stations
that were missed while auto tuning.
S3DABB_WI11E_IB_5L_111215.indb 27
15/12/2011 10:13 AM
