Please ensure mains cable is DISCONNECTED from the mains socket before connecting any cables.
• Reversing the steps by connecting the mains cable first may cause the unit to malfunction.
• During operation if the cables / wires require to be reconnected, the mains must be disconnected first. Otherwise damage may be caused to the unit.
You will find that there are many exciting features available.
To get to know all these features, please take some time to read the instruction manual provided.
1
Unpacking
2
Battery
3
Connections
4
Clock Setting
5
Basic Operation
Tip:
S40IP13E
Instruction Manual
HiFi system with dock for iPhone/ iPod/ iPad
GB
Thank you
for purchasing your new Sandstrøm Hi-Fi.
Please follow this quick start guide for a successful first time set up.
We recommend that you spend some time reading the instruction manual in order to fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for future reference.
Remove all items from the packaging. Retain the packaging.
If you dispose of it please do so according to any local
regulations.
Main Unit
Speakers x 2
Remote Control
Instruction Manual
Speaker
Cable x 1
QSG-S40IP13E-130705V3-1
Remove the insulating mylar strip
from the battery if the battery is
being used for the first time. It is
located at the bottom back side
of the remote control.
Displaying the Clock
Press the CLOCK button in any mode to display the clock.
Auto Setting the Clock
In TUNER mode, press and
hold the DISPLAY button.
The clock will automatically
update.
Manual Setting the Clock
1. In standby mode, press
and hold the CLOCK
button, CLOCK SET will
be displayed and the
‘24HR’ will flash.
2. Press the VOL +/– to
select 24 or 12 hours,
then press CLOCK.
3. Press the VOL +/– to set
the hours, then press
CLOCK.
4. Press the VOL +/– to set
the minutes, then press
CLOCK.
Battery Installation for the Remote Control
1. Unwind the screw and slide open
the battery compartment of the
remote control.
FM Aerial x 1
Quick Start Guide
2. Remove the old battery, and place
a new battery (CR2025 Lithium
Battery) in the holder.
3. Close the battery compartment
cover and wind the screw back on.
Connecting the FM Aerial
Connect the FM wire aerial provided to the FM Aerial socket as illustrated below.
1
Speaker Connections
Connect the speaker cables at the back of the speakers to the speaker sockets (L/R) at the rear side of the unit.
2
Connecting to the Mains Supply
Insert the mains plug into a wall socket, and your system is ready to use.
3
Selecting Modes
Press the FUNCTION button repeatedly to select TUNER,
DOCK, AUX-IN, MP3 LINK, BLUETOOTH or USB mode.
TUNER
DOCK
AUX-IN
BLUETOOTH
MP3 LINK
USB
Switching the unit On
Press the STANDBY button on the unit or on the remote
control to switch the unit on.
You can also press the short-cut buttons on the remote
control ( , , , , , ) to
select your desired mode.
USB
FM
AUX
MODE
A-B
DIM
P-EQ
LOUDNESS S-BASS
DISPLAY
CLOCK
PRESET
SLEEP/TIMER
MENU
MP3 LINK
DOCK
Connecting to the
Mains Supply
Back View
Connecting the
FM Aerial
1
3
MP3-LINK
AUX IN
R
L
SPEAKER OUTPUT(6 )
AERIAL
FM
AV MAINS~
2
Speaker Connections
OK
USB
FM
AUX
MODE
A-B
DIM
P-EQ
LOUDNESS S-BASS
DISPLAY
CLOCK
PRESET
SLEEP/TIMER
MENU
MP3 LINK
DOCK
OK
FM
USB
AUX
DOCK
MP3 LINK
