Sandstrom S4SSFF12, Instruction Manual

10

Operation

Temperature Setting

Fridge Compartment Temperature Setting

•  Touch the cooler control repeatedly to adjust the fridge temperature between 2°C to 8°C and SC.

Freezer Compartment Temperature Setting

•  As a Freezer Mode
 

Touch the zone 1 (left freezer compartment) or zone 2 (right freezer compartment) control repeatedly 
to adjust the freezer compartment temperature between -16°C to –24°C and SF.

•  As a Cooler Mode

1.   Touch and hold the zone 1 (left freezer compartment) or zone 2 (right freezer compartment) 

control for 3 seconds to switch to cooler mode. The temperature will be automatically set to 8°C.

2.   Touch  the  zone 1 (left freezer compartment) or zone 2 (right freezer compartment) control 

repeatedly to adjust the freezer compartment temperature between 2°C to 8°C.

•  If the temperature in the fridge storage compartment is too low, the super cooling function may 

not work.

•  The super cooling function will automatically deactivate after 4 to 6 hours.
•  In Super Cooling mode, more energy will be consumed.
•  If Zone 2 is set to Cooler mode or to SF, Super Cooling will not be available.

Super Cooling

Touch the cooler control repeatedly until the temperature display shows SC and the “sc” indicator 
illuminates. This function will automatically deactivate when the fridge storage compartment temperature 
decreases to 2°C.

•  The temperature shown on the display is the temperature you have set the fridge/freezer to get to. 

NOT the actual temperature inside the fridge/freezer.

•  It may take a few hours (approx. 5 hours) for the unit to reach the target temperatures. The time to 

reach the set temperatures will vary depending on the temperature difference and the type and 
amount of food stored in the compartments.

•  Please note the Ice Trays are in Zone 2. Any ice in these trays will melt if set to cooler mode.
•  Make sure you don’t have any frozen food in zone 1 or 2 if you are activating the cooler mode, or 

remove any food you do not want freezing if setting to Freezer mode.

•  If setting from Freezer to Cooler mode, leave the door open for 4 hours to allow the temperature to 

rise.

•  If only one zone is to be set as Freezer, then use Zone 1.
•  Do not use Zone 2 in cooler mode at ambient temperatures over 38°C.

Super Freezing

Touch the zone 1 (left freezer compartment) or zone 2 (right freezer compartment) control repeatedly 
until the temperature display shows SF and the “sf” indicator illuminates. This function will automatically 
deactivate when the freezer storage compartment temperature decreases to -32°C.