INSTALLATION
5
Location
When selecting a position for your unit you should make sure the floor is a flat and firm surface. Do
not stand your unit on carpet or rugs, which may obstruct the air flow around the unit. The room must
be well ventilated with an average room temperature of between 16°C and 43°C. Avoid locating your
unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the
electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform
properly. This unit is not designed for use in a garage or outdoor installation. Do not drape the unit
with any covering.
When installing the unit, ensure that 20 mm of free space is left at both sides, 30 mm at the rear of the
unit and 150mm above.
Spacers
To make sure you have the correct amount of
space between your fridge freezer and the
wall attach the two spaces to the black grill
on the back of your fridge freezer.
Slide the spacers between the grill and then
turn them 90
o
to lock them in position.
Be careful not to damage the grill.
Slide the unit towards the wall until the
spacer just touches the wall.
20mm
20mm
30mm
480mm
1162mm
1550mm
Wall
Fridge Freezer
Cupboard
Cupboard
Installation
Summary of Contents for S4SSFF12
Page 1: ...Instruction Manual Fridge Freezer S4SSFF12...
Page 2: ......
Page 23: ...23...
Page 24: ...24...