INSTALLATION
7
Levelling the Unit
To do this use the two levelling feet at the front of the unit.
If the unit is not level, the magnetic door seals will not align
correctly.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of Bicarbonate of soda. Then rinse with warm water
using a ‘damp’ sponge or cloth. Wipe completely dry before replacing the shelves, drawers and salad
bins. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
Interior Accessories
Various glass or plastic storage shelves are included with your appliance – different models have
different combinations.
You should always slide one of the full size glass storage shelves into the lowest set of guides, above
fresh food drawer, and keep it in this position. Support the shelf underneath, lift and bring forwards, to
change shelf positions place a shelf into the fridge and ensure the rear corners are on the supports and
lower the front on the front supports.
For the lowest shelf, lower the shelf into position on the lower runner and slide into place.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit and
easily accessible or an easily accessible switch incorporated in the fixed wiring.
• Before Turning On!
Do not turn on until three hours after moving the unit. The coolant fluid needs time to settle.
In order to make the most of the volume of the fresh food storage compartment and frozen-food
storage compartment, the user can remove one or more shelves, or drawers, out of the appliance,
according to daily use.
Summary of Contents for S4SSFF12
Page 1: ...Instruction Manual Fridge Freezer S4SSFF12...
Page 2: ......
Page 23: ...23...
Page 24: ...24...