35
GB
Customising the Audio Settings
1. Press the SETUP button on the remote control to
display the setup menu.
2. Press the buttons to select AUDIO SETUP
PAGE.
3. Press the
buttons to select the following
options and then press the buttons to change
the setting.
- - AUDIO SETUP PAGE - -
GOTO AUDIO SETUP PAGE
DOWNMIX
DOLBY DIGITAL
STR
DOWNMIX
Allows you to set the stereo analog output of your DVD player.
•
LT/RT
Select this option if your DVD player is connected to a
Dolby decoder.
•
STEREO
Select this option to change channel output to stereo
which delivers sound from only the two front speakers.
DOLBY DIGITAL
•
DUAL MONO
If your amplifier / decoder has Dolby Digital output, you
may select stereo, left mono, right mono, or mixed mono
mode for your amplifier decoder.
•
DYNAMIC
Dynamic range compression.
4. Press the SETUP button to exit the menu.
AUTO STANDBY
This function is used to select auto standby setting after 3 or
4 hours.
3 HOURS: the unit will turn to standby mode after 3 hours if
there is no interaction from user within this period of time.
4 HOURS: the unit will turn to standby mode after 4 hours if
there is no interaction from user within this period of time.
OFF: the auto standby function is disabled, and unit will stay
in “on” mode even if no interaction from user.
4. Press the SETUP button to exit the menu.
