Adjusting the Sound Effect
Press the EQ button the remote control repeatedly to select POP, CLASSIC, JAZZ, ROCK or
FLAT for your desired sound effect.
Adjusting the Brightness
Press the DIMMER buttons to select the brightness level.
Setting of the Clock
Manual Setting of the clock can only be done in STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button on the remote control until the
hour digits are flashing.
2. Press button to select 12-hour or 24-hour mode.
3. Press the
buttons on the remote control to adjust the hour digits while flashing,
then press the CLOCK buttons on the remote control to confirm, then the minute digits
will flash.
4. Press the
buttons to adjust the minute digits while flashing, then press the CLOCK
buttons on the remote control to confirm.
5. Each activated state will be cleared if any buttons are not pressed within 15 seconds.
Time Display
Press the CLOCK button to show the current time on the display for few a seconds.
Synchronising the Clock
When in STANDBY mode, press and hold MENU button to synchronise the clock.
Press the
buttons on the remote control to select below options:
• AUTO: Synchronise the clock automatically.
• FM: Synchronise the clock with FM radio.
• DAB: Synchronise the clock with DAB radio.
• OFF: Turn off clock synchronisation.
Press button to confirm.
Setting the Alarm Timer
The clock must be correctly set for the timer to operate correctly.
1. In STANDBY mode, press and hold the TIMER/SLEEP button on the remote control
until the hour digits flash on the display.
2. Press the
buttons on the remote control to adjust the hour digits, and then press
the TIMER/SLEEP button on the remote control to confirm, the minute digits will flash
on the display.
3. Press the
buttons on the remote control to adjust the minute digits, and then press
the TIMER/SLEEP button on the remote control to confirm, the tuner timer will flash on
the display
16
