DAB Operation
To listen to the tuned stations press the button. Each time you press the
button, you will skip to the previous or next stored station (including primary and
secondary station). The unit will display the station name.
1. Press button on the unit repeatedly or DAB/FM on the remote control to select DAB
radio.
2. Press MENU to display the DAB menu. Press to button to select Full scan. Press
button to confirm.
Auto Scan
The auto scan will search for all DAB Band III channels. After the scan has finished, the first
alphanumerically found station will be automatically selected.
1. Press the MENU button on the remote control to enter the DAB Menu. Then press the
buttons to select the “FULL SCAN”. Press the button on the remote control to
confirm. The display will show “SCAN…”that indicates the progress of the scan and the
amount of stations that have been found so far.
Alternatively directly press SCAN on the unit or on the remote control to perform a full scan.
2. Once the scan has finished, the unit will display the total number of stations have been
found and a list of the found stations. All the stations that have been found will be
stored automatically.
To explore the found stations, press the buttons to the selected station.
Full auto scan will not replace the DAB stations in memory. If you want to remove all the previously
scanned stations, system reset is required.
Presetting Stations
You can store up to 20 of your favourite DAB stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save.
2. Press PROG button on the remote control. The display will show “## Empty”, and the
preset number will flash.
3. Press buttons on the remote control to select your desired station preset number.
4. Press the PROG button to confirm your station, the display will show “STORE”.
18
