COMe-cVR6 – User Guide Rev. 1.5
// 72
The following table shows the Main Menu sub-screens and functions and describes the content. Default options are
displayed bold. Some functions include additional information.
Table 69: Main Setup Menu Sub-screens
Sub-Screen
Description
BIOS
Information>
Read only field
Displays BIOS Information:
BIOS vendor, Core version, Compliancy, Kontron BIOS Version and Access level
Board
Information>
Read only field
Displays Board Information:
Board ID, Fab ID, and LAN PHY revision
Platform
Information>
Read only field
Displays Module Information
Product Name, Revision, Serial # ‚MAC Address, Boot Counter, and CPLD Rev
Additional information for MAC Address
The MAC address entry is the value used by the Ethernet controller and may contain the entry’
Inactive’ - Ethernet chip is inactive.
Activate the Ethernet chip by setting the following to ‘enable’.
Advanced > Network Stack Configuration > Network Stack > Enable
88:88:88:88:87:88 is a special pattern that will be filled in by the Ethernet firmware if there is
no valid entry in the firmware block of the BIOS SPI (i.e. the MAC address has been overwritten
during the last attempt to flash the system).
System Date>
Displays the system date
[Day mm/dd/yyyy]
System Time>
Displays the system time
[hh:mm:ss]
