COMe-mEL10 - User Guide Rev. 1.1
// 72
Sub-screen
Next Level Sub-screens / Description
System Agent
(SA)
Configuration>
(continued)
Memory
Configuration>
(continued)
Train On Warm
Boot>
[Enabled, Disabled]
BDAT Memory
Test Type>
Read Only field
[Rank margin Tool Rank]
Graphics
Configuration>
Skip Scanning of
Exernal Gfx Card>
Enabled- will not scan for external Gfx card on PEG and
PCH PCIe ports
[Enabled, Disabled]
Primary Display>
Select the graphics device which is the primary display or
select HG for hybrid Gfx.
[Auto, IGFX, PEG, PCI]
External Graphics
Cards Primary
Display
Configuration>
Primary
PCI>
Select:
Auto/PCIE1 to PCIe7 of D28: F0 to F7,
PCIE8 to PCIE15 of D29: FO to FF7,
PCIE16 to PCIe19 of D27: F0 to F3,
Graphics device should be primary PCIE
[Auto, PCIE1, PCIe2, …….. PCIE18, PCIE19]
Internal Graphics> [Auto, Disabled, Enabled]
GTT Size>
[2MB, 4MB, 8MB]
Aperture Size>
[128MB, 256MB, 512MB, 1024MB, 2048MB]
DVMT Pre-
allocated>
Selects the pre-allocated (fixed) graphics memory size
used by the internal device
[ 32M, 64M, 96M 128M, 160M, 4M, 8M, 12M , 16M, 20M,
24M, 28M, 32M/F7, 36M, 40M, 44M, 48M, 52M, 56M ,
60M]
DVMT Total Gfx
Mem>
Selects the total graphics memory size used by the
internal device [128M, 256M, Max]
PM Support>
[Enabled, Disabled]
PAVP Enable>
[Enabled, Disabled]
VT-d>
[Enabled, Disabled]
X2APCI Opt
Out>
[Enabled, Disabled]
DMA Control
Guarantee>
[Enabled, Disabled]
IGD VTD
Enable>
[Enabled, Disabled]
IPU VTD
Enable>
[Enabled, Disabled]
IOP-VTD
Enable>
[Enabled, Disabled]
ITBT VTD
Enable>
[Enabled, Disabled]
CPU Crash Log
(Device 10)>
[Enabled, Disabled]
