COMe-mEL10 - User Guide Rev. 1.1
// 13
1/
Introduction
This user guide describes the COMe-mEL10 module made by Kontron and focuses on describing the modules special
features. Kontron recommends users to study this user guide before powering on the module.
1.1.
Product Description
The COMe-mEL10 is small form factor COM Express® type 10 Computer-On-Module designed for flexible
implementation within multiple embedded industrial environments. The COMe-mEL10 is based on the Intel® Multi Chip
Package (MCP) Atom™, Pentium® and Celeron® processors with an integrated PCH to combine increased efficiency and
performance with TDP as low as 6 W and no more than 12 W, and includes Intel’s® extensive HD Graphics capabilities.
Key COMe-mEL10 features are:
Intel® Multi Chip Package series of Atom™, Pentium® and Celeron® processors
Small form-factor COM Express® mini Type 10 pinout, compatible with PICMG COM.0 Rev 3.0 spec
Up to 16 GByte LPDDR4 memory down (with in-band ECC)
High-speed connectivity 4x PCI Express, 1x 1 Gb Ethernet, 2x USB 3.1 + 6x USB 2.0, 2x SATA Gen.3
Support for Industrial and commercial temperature grade environments
Figure 1: COMe-mEL10 Front Side
1
Multi-Chip Package (MCP)
2
Up to 4 memory chips depending on
the capacity
3
3-pin fan connector
4
4x mounting points for standoffs
1
4
4
2
3
4
4
