KBox A-150-SKL - User Guide Rev. 1.1
// 40
Switching Off
9.2.
To switch off the KBox A-150-SKL without performing a force shutdown, perform the following:
1.
Press the Power-on switch, see Figure 3 and Figure 4 , pos.7.
2.
The system performs an orderly shutdown.
3.
If required, completely switch off by disconnecting the power connection at the DC Input power connector or the
DC power supply.
Even when switched off using the power-on switch, parts of the system are still energized.
The product is only completely switched off when the power has been switched off using
the power-on switch and the power wiring is disconnected from either the DC power supply
or the DC Input power connector.
Do not disconnect the power while the system is switched on. This performs a forced
shutdown and can lead to loss of data. Switch off using the Power-on switch to perform an
orderly shutdown without data loss.
Switching On
9.3.
To switch on while the KBox A-150-SKL is connected to the DC power supply, perform the following:
1.
Press the Power-on switch, see Figure 3 and Figure 4, pos. 7.
2.
The system switches on.
Do not disconnect the power while the system is switched on. This performs a forced
shutdown and can lead to loss of data. To perform an orderly shutdown without data loss,
switch off using the Power-on switch.
Operating System (OS) and Drivers
9.4.
The KBox A-150-SKL comes factory configured, with a pre-installed Operating System (OS) and all the necessary
drivers (in accordance with the ordered hardware configuration). The KBox-A-150-SKL is full operation when
switched on for the first time.
To download relevant drivers for the factory installed hardware components visit Kontron’s
EMD customer section: https://emdcustomersection.kontron.com.
Pay attention to the manufacturer OS specifications relating to the integrated hardware
components.
