KBox A-150-SKL - User Guide Rev. 1.1
// 67
12.2.6.
Save and Exit Set up Menu
Figure 41: Save and Exit Set up Menu Example
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Main
Advanced
Power
Boot
Security
Save & Exit
Save Changes and Reset
Discard Changes and Reset
→
←
: Select Screen
Save Options
↑
↓
: Select Item
Save Changes
Enter: Select
Discard Changes
+/-: Change Opt.
F1: General Help
Restore Defaults
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Version 2.18.1263. Copyright (C) 2018, American Megatrends, Inc.
The following table gives more information for important setup options within the Save and Exit Menu. Default
settings are displayed in bold.
Table 19: Save and Exit Setup Menu Sub-screens and Functions
Function
Description
Save Changes and
Reset
Exits system after saving changes
Once you are finished making your selections, choose this option to ensure the values you
selected are saved to the CMOS RAM. The CMOS RAM is sustained by an on-board backup
battery and stays on even when the PC is turned off. When you select this option, a
confirmation window appears. Select [Yes] to save changes and exit.
Discard Changes
and Exit
Exits system setup without saving changes
Select this option only if you do not want to save the changes that you made to the Setup
program. If you made changes to fields other than system date, system time, and password,
the BIOS will asks for a confirmation before exiting.
Save Options
Read only field
Save Changes
Saves changes made so far for any setup options
Discard Changes
Discards changes made so far to any of the setup values
This option allows you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select [Yes] to discard any
changes and load the previously saved values.
Restore Defaults
Restores/loads standard default values for all setup options
Load Optimal Default values for all the setup values
This option allows you to load optimal default values for each of the parameters on the
Setup menus, that provides the best performance settings The F9 key can be used for this
operation.
Load Failsafe Default values for all the setup values
This option allows you to load failsafe default values for each of the parameters on the
Setup menus, that provides the most stable performance settings. The F8 key can be used
for this operation.
