KBox A-150-SKL - User Guide Rev. 1.1
// 27
Internal Expansion
5.2.
The KBox A-150-SKL supports one M.2 (2242) SSD module and one mPCIe (full-size) expansion card. Kontron
recommends the use of Kontron reference M.2 modules and mPCIe cards.
Protection label
The KBox A-150-SKL is factory configured to meet customer requirements and then sealed
with a protection label. Opening the KBox A-150-SKL invalidates the warranty and may
cause damage to internal components.
5.2.1.
M.2 Module
Support for one M.2 (2242) SSD module with a maximum capacity of up to 512 GByte. For more information regarding
Kontron reference M.2 SSDs, see Table 5: M.2 Module Memory Expansion.
Table 5: M.2 Module Memory Expansion
Storage Device
Description
1x M.2 (2242) SSD module
M.2 Key B,
2242 (width 22 mm and length 42 mm)
SATA SSD drive
Capacity: 32 GByte, 64 GByte, 128 GByte, 256 GByte or 512 GByte
5.2.2.
mPCIe Expansion Card
Support for one mPCIe version 1.2 (full-size) expansion card. For more information regarding Kontron reference
mPCIe expansion cards, see Table 6: mPCIe Expansion Card Option.
Table 6: mPCIe Expansion Card Option
mPCIe Expansion card
Description
1x Wi-Fi mPCIe (half-size)
Dual band frequencies (2.4 GHz & 5 GHz)
Bluetooth (BT) 4.1+HS
IEEE802.11 ac/abgn Wi-Fi certified
Speeds 300 Mbps max. on N & 867 Mbps on AC
Only full-size mPCIe expansion cards are supported.
The reference Wi-Fi mPCIe expansion card is half-size and factory installed using a half-size
to full-size adapter.
