KSwitch D4 MF Managed Fast Ethernet Switch - User Guide, Rev. 1.0
// 82
9.12.2.
Trunk & Link Aggregation
Trunk Group combines several specific ports and use load balance design to achieve higher bandwidth and
performance. KSwitch D4 MF series supports four FE groups and two Gigabit Ethernet groups,
Each FE trunk group includes a maximum of four members, Gigabit group includes two members. It is also possible to
combine two FE group to one trunk group or four-gigabit port as one group.
Advanced Features -> Trunk & Link Aggregation
Parameter
Default
Description
Link Aggregation
Algorithm
MAC Source
Link Aggregation Algorithm, support Port, MAC
Source, MAC Destination, IP Source, IP Destination,
TCP/UDP Destination Port, TCP/UDP Source Port
Group
Group index
Combine Group
Combine two groups as one
Port Select
Select group member
Status
Display member accomplished status, ”A” means
setting accomplished
State
Disable
Enable / Disable status
Trunk Type
LACP
Select Trunk type, LACP or Static
Mode
Passive
Mode selection, Passive or Active
Time Out
Short
Time Out selection, supports “Short” and “Long”
Short
- one packet per second, Time Out is 3 sec
Long
- one packet per 30 sec. and Time Out is 90 sec.
