SBOX-5210 - User Guide, Rev. 1.0
// 40
7.1.4.
VESA Mounting
Depending on the ordered SBOX-5210 configuration, your system may be supplied with a VESA mounting kit (Figure
16). The kit consists of one VESA adapter (Figure 16, pos. 1), four cross-head screws (Figure 16, pos. 2) and four thumb
head screws with hanger knobs (Figure 16, pos. 3).
Figure 16: Optional VESA mounting kit
1 VESA Adapter
2 Cross-head Screw
3 Thumb Screw with Hanger Knob
The VESA adapter complies with VESA 100 patterns (Figure 17). To fasten the bracket, the custom enclosure / machine
/ monitor / wall must have VESA 100 screw pattern shown as Figure 17 for mounting.
Figure 17: Hole pattern of VESA adapter
(unit: mm)
2
1
3
