SBOX-5210 - User Guide, Rev. 1.0
// 74
12.2.3.
Security Setup Menu
The Security setup menu provides information about the passwords and functions for specifying the security settings.
The passwords are case-sensitive. The SBOX-5210 provides no factory-set passwords.
If there is already a password installed, the system asks for this first. To clear a
password, simply enter nothing and acknowledge by pressing <RETURN>. To set a
password, enter it twice and acknowledge by pressing <RETURN>.
Figure 39: BIOS Security Setup Menu
BIOS SETUP UTILITY
Main
Advanced
Security
Power
Event Logs
Boot
Save & Exit
Password Description
If ONLY the Administrator's password is set, then this only limits access to
Setup and is only asked for when entering Setup.
If the User's password is set, then this is a power on password and must
be entered to boot or enter Setup. In Setup the User will have USER rights.
The password length must be in the following range:
Minimum length
3
Maximum length
32
Minimum User Password Length
4
Supervisor Password
→
←
: Select Screen
User Password
↑
↓
: Select Item
Password Severity
[Standard]
Enter: Select
Password on Boot
[Disabled]
+/-: Change Opt.
Skip Password on automatic Wakeup
[Disabled]
F1: General Help
System Firmware Update
[Enabled]
F2: Previous Values
System Firmware Rollback
[Disabled]
F3: Optimized Defaults
F4: Save & Exit
> Secure Boot Configuration
ESC: Exit
Version 2.20.1271. Copyright (C) 2019, American Megatrends, Inc.
Feature
Option
Description
Supervisor Password Password input
Set Supervisor Password
Password Severity
[Standard], [Strong],
[Stringent]
[Standard]: In case of a lost password, unlocking possible via
physical presence.
[Strong]: In case of a lost password, unlocking only possible via
service.
[Stringent]: In case of a lost password, the system is
permanently unusable.
Password on Boot
[Disabled]
This field is not selectable.
Skip Password on
automatic Wakeup
[Disabled]
This field is not selectable.
