TPMS1209T03-CS Hand Tool User Manual
10
发送信息给中继器
1.
当设定好
BOOSTER ID
和传感器
ID
码后，按
或
键选择到“
SEND INFORMATION
TO BOOSTER
”，然后将手持工具靠近智能中继器，按“
Enter
键”进入发送。此时显示
“
SENINING
. . .
”
，表示正在向智能中继器发送信息。
1. When finished programming the BOOSTER ID and transmitter ID, press or to select
“
SEND INFORMATION TO BOOSTER, then put the Hand Tool close to the Smart Booster,
press “ENTER” button to send the information. The screen display
“
SENINING
. . .
”
, it means
sending information to Smart Booster.
2
．当手持工具收到回复信息后，显示“
SET SUCCESS
！”，表示设置成功。
2. When the Hand Tool receives the response, the screen display
“
SET SUCCESS
！”
, it means
programming succeeds.
〉
SEND INFORMATION TO BOOSTER
READ SENSOR ID
SENINING
. . .
SET SUCCESS!
〉
READ INFORMATION TO BOOSTER
CHOOSE BOOSTER ID
PRESSURE UNIT SELECT
ADD SENSOR TO TRAILER
