9
splwashrooms.co.nz
It is necessary, for the
proper function,
to keep the unit under
constant voltage
(don´t connect the
power supply unit
behind the switch into
the light circuit)
Do not come within active range
Turn power supply on
Once power turned on,
faucet will automatically
adjust sensing range
during first 10 seconds.
The LED on sensor will
continually flash, do not
come in active range
during this time.
Important
•
Pipework is required to be flushed thoroughly prior to faucet and solenoid
installation. Foreign debris may reduce level of flow and in some cases damage
the solenoid valve.
• The senor of the faucet must not be obstructed.
•
Avoid positioning reflective objects or surfaces in front of the faucet sensor. This
can cause false activation i.e. mirrors opposite faucet. With wall mounted faucets
pay particular attention to the distance between the bottom of the basin and the
faucet (minimum of 300mm) and the location and material of the basin waste
(avoid mounting directly over the waste and/or choose non reflective options).
•
All plumbing and electrical installation must be carried out by a qualified person
and in accordance with applicable codes and regulations.
