The wall mounted receiver should be installed close to the boiler. It takes the RF signals from the thermostat
and switches the boiler accordingly.
Important : The thermostat and receiver are paired in the factory and are ready for use.
ok
–
+
1) Key for menu access
2) Key to access holiday
3) Key to access the temporay override
4) Confirmation key
OK
5) Adjustment keys
+
and
-
6) Indicator for days of the week
7) Automatic mode/manual mode (thermostat without
program)
8) Temperature set-points adjustment
9) Standby
10) Heating/Air-con selector
11) Programming/program selection
12) Time and date adjustment
13) Adjustment of settings
14) Ambient temperature
15) Heating or air conditioning indicator
16) Current mode (heating or air conditioning)
17) Current setting (
, , ,
)
18) Temperature of current setting
19)
Telephonic remote-control
20) Battery use indicator
21) Profile of today’s program
22) Current time
Adjusting the temperature set points
Heating (H) defaults : Comfort = 19°C , Comfort 2 = 20°C , Eco = 16°C
Air-con (C) defaults : Comfort = 24°C , Eco = 29°C
Programming
There are four program choices
P1,P2,P3 are pre-recorded and cannot be modified
P4 is free for a personalised program
Note P1o is only available when the optimisation parameter is active, set to Auto (PA:9)
P1 is activated 7 days per week by default. If this fits the rhythm of your life then remain in automatic mode;
if not, continue
Note P4A is only active when the anticipation parameter is active, set to 1hr,2hr or 3hr (PA:9)
30
min.
in
Eco
30
min.
in
Comfort
30
min.
in
Comfort
2
3
10
Thermostat Description
Receiver Description
A - Function button, fct
B - Operating indicator light. This light is lit when the output contact of
the receiver is closed = ON.
C - Coding indicator : THis light flashes during coding operations
D - Configuation button, cfg.
fct
cfg
fct
LED
cfg
LED
Press MENU, cursor under
Comfort 1 Temp flashing
Adjust by +/-
Press OK
Comfort 2 Temp flashing
Adjust by +/-
Press OK
Eco Temp flashing
Adjust by +/-
Press OK
Return to Auto mode
P1= Comfort temperture from 06:00 to 23:00.
Eco temperature from 23:00 to 06:00.
P1
o =
Optimisation (only with P1).
Comfort temperture from 07:00 to 23:00.
Eco temperature from 23:00 to 07:00.
P2
=
Comfort temperture from 06:00 to 08:30 and from
16:30 to 23:00.
Eco temperature from 08:30 to 16:30 and from 23:00
to 06:00.
P3
=
Comfort temperture from 06:00 to 08:30 from 11:30
to 13:30 and from 16:30 to 23:00.
Eco temperature from 08:30 to 11:30 and from 13:30 to
16:30 and from 23:00 to 06:00.
P4
=
a free program which allows you to create up to 5
Comfort temperature periods and 5 Eco temperature
periods, for each of the days of the week.
