USER INSTRUCTIONS -
PROGRAMMING
BOOST
The Powersaver Boost offers 3 options for the on period
duration : ½ hour, 1 hour or 2 hours.
To activate the Boost function, press Boost button once
for ½ hour, twice for 1 hour or 3 times for 2 hours. On
the fourth press of the button, the operation will cancel.
INDICATOR LIGHTS
The Powersaver Boost is fitted with three indicator lights
to display which setting is selected. While the Boost is
active, the indicator light will change to identify the
maximum remaining boost time e.g. 2 HOURS selected.
BOOST MAXI
The Powersaver Boost Maxi functions exactly as the
‘BOOST’ above offering 3 options for the on period
duration : 1 hour, 3 hours or 5 hours.
D
AILY, WEEKLY, 24/7
(See flap label for identification if in doubt)
After the unit has been installed and powered up, a full
display will be indicated. As shown below, this initial
display will flash continuously until the Time Setting Mode
has been entered.
TIME SETTING MODE:
(Example Wednesday 6:15pm)
1. Press the Set button once and the display shown below
will be indicated.
During time and program mode, parts of the display that
flash indicate what can be altered.
2. Use the Hour and Minute buttons to select the correct
time. Remember to ensure that the am/pm indicator is
correct.
3. Use the Day button to select the correct day of the
week (Weekly & 24/7 programmers only).
4. Once the correct time has been entered, the display will
be as shown below.
5. Press the Set button once, to confirm.
PROGRAM SETTING MODE
:
As soon as the correct time has been selected and the
Set button pressed, the unit automatically proposes that
the program switching time be set and the display shown
below will be indicated.
It is best to write down all program times, prior to
programming.
PROGRAM EXAMPLES:
TO SET PROGRAM SWITCHING TIMES:
1. Use the Hour and Minute buttons to set the first on
time, e.g. Prog 1 ON : 7:40am (see display below).
2. Press the Set button once to confirm and set Prog 1
(see display below).
3. Use the Hour and Minute buttons to set the first off
time, Prog 1 OFF: 8:30am (see display below).
4. Press the Set button once to confirm and set next time.
5. To input programs 2 and 3, repeat steps 1 – 4.
6. When program 3 off time has been entered :-
a) DAILY - Go to step 9
b) WEEKLY - unit then proposes the weekend switching
times (see display below).
c) 24/7 unit then proposes Tuesday switching times (see
display below).
7. To input the next day or day group program times,
repeat steps 1 – 5.
8.
24/7 only
- Additional speed features on 24/7 unit
when setting programs:-
a) Press Boost to copy current day programs into the next
day (see display below).
b) Press Day to skip to next day (see display below).
9. When the Set (or Day or Boost on 24/7 unit) has been
pressed for the last time, the display will return to the
normal running mode, as shown below.
The indicator light will glow green when a program is
active.
NOTES ON PROGRAMMING:
a) All programs must be in consecutive order, i.e. Program
1 must be before Program 2, and Program 2 before
Program 3. If in the wrong order, error messages will be
displayed.
b) If only 2 or less programs are required, for the
remaining programs enter the same on and off times,
e.g. Prog 3 on 8:00pm, off 8:00pm. This ensures the
unwanted program is cancelled.
c) Programming past midnight is NOT allowed. An error
message will displayed. To overcome this the program
needs to be split as per example:
Desired Program Period - on 10:00pm off 07:00am
make Prog 1 - on 12:00am off 07:00am
make Prog 2 - on 07:00am off 07:00am
make Prog 3 - on 10:00pm off 12:00am
Progs make up desired program period leaving prog 2
available for a program during the day.
d) If you try to input the off time before the on time, an
error message will be displayed. Press Set to continue.
e) If a button is not pressed within 30 seconds, the unit
will revert to the normal running mode. To return to the
programming, continue to press the Set button until the
program step you require is shown.
REVIEW MODE/PROGRAM MODIFICATIONS MODE:
To review/change program settings:
1. Press set button twice to access first program setting.
2. Continue to press set button to scroll through all
program settings.
3. 24/7 only you may also press day button to fast
forward to specific day.
4. Use the hour & minute buttons at any time to change a
program setting.
5. Either continue to press the set buttons (24/7 only
- you may also press day button) until the normal running
mode displayed or leave unit for 30 seconds and it will do
so automatically.
NORMAL RUNNING MODE:
In the normal running mode, the unit displays the correct
time and day and active programs, e.g. as shown below.
There are 3 more features available in this mode:-
A. Boost mode.
B. Off (Holiday) mode.
C. Program Override mode.
A. BOOST MODE:
There are 3 boost options:-
½ hour
1 hour
2 hours
To activate the boost function, press the Boost button
once for ½ hour, twice for 1 hour and three times for 2
hours. On the fourth press of the button, this facility will
be cancelled.
As the Boost button is pressed, the display will indicate
which option you have selected. The indicator light will
glow green.
The display will show remaining boost time.
If, while a boost period is active, you wish to extend the
action, press the Boost button until you reach the desired
length, i.e. ½ hour, 1 hour, 2 hours.
B. OFF (HOLIDAY) MODE
The holiday function allows you to suspend programmes
whilst still allowing the Boost function to be used.
To activate, simply press the Off button once and “OFF”
will be displayed. To cancel this function, press the Off
button again. See display below.
NOTE : This is NOT an override function for programs.
NOTE : BOOST mode still active
C. PROGRAM OVERRIDE MODE
If, during a program On time, you wish to cancel the
program, simply press the Boost button once.
NOTE : The program settings will not be affected and the
next time this program is due, it will function as normal.
Adjoining programs will also be cancelled.
143082_J
Weekly i.e. Mon-Fri
PS24/7 i.e. Mon / Wed / Fri
Prog 1 – on 7:40am off 8:30am
Prog 2 – on 11:50am off 12:40pm
Prog 3 – on 5:20pm off 11:00pm
Weekly i.e. Sat / Sun
PS24/7 i.e. Tue / Thur / Sat / Sun
Prog 1 – on 8:30am off 10:30am
Prog 2 – on 12:00pm off 2:30pm
Prog 3 – on 6:00pm off 11:30pm
Daily
Prog 1 – on 7:40am off 8:30am
Prog 2 – on 11:50am off 12:40pm
Prog 3 – on 5:20pm off 11:00pm
