Dynamic Range Control setting
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your
radio is used in a noisy environment by reducing the dynamic range of the audio signal.
Press the Standby button to switch on your radio.
Press the Radio button as needed to select DAB radio mode.
Press and hold the Menu button to enter the DAB menu.
Press the Folder Up or Down buttons until 'DRC' is highlighted on the display.
Press the Select button to enter the DRC adjustment mode. The current DRC setting will be
indicated with an asterisk.
Use the Folder Up or Down buttons to highlight the required DRC setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
Press and release the Select button to confirm the setting.
Note:
Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC information,
then the DRC setting in the radio will have no effect.
1.
2.
3.
4.
5.
6.
7.
51
Summary of Contents for DDR-63 - PRODUCT DESCRIPTION
Page 1: ...DDR 63 GB Rersion 1...
